REAR HUB KIT WITH BATTERY PACK

Complete Electric Bike Rear Hub Kit with 36V13Ah Battery Pack

Available in 27.5 inch or 700c/29inch Motor Rim

Features

Motor Das-Kit X-15 Rear Motor Wheel (55Nm), black, 36V 250W, planetary gear

Sprocket Ready for freewheel sprocket (up to 7-speed) Brake 6-hole disc brake mount (disc not included), rim brake possible to be used.

Display: Das-Kit Display ncl. backlight, display extension cable , 6 Assistant Levels,

Controller Sinus Wave Controller 36V, Current 7A, maximum current 15A (1 Sec.), Connections: Motor, Battery, Display, Front light up to 42V 

PAS-Disc (left side only) PAS-Disc (12 magnets) Installation on the right side of the bottom bracket. For an installation on the left side, a special Hollowtech & Octalink Sensor is needed.

PAS-Sensor (left side only) Easy installation, for example at bicycle frame.

Brake Levers Artek brake levers, cut-off sensor on the left side

Spokes: Stainless steel

Rim :hollow section type rim [black]

Fixing Cable ties included

Weight Rear wheel motor including rim: approx. 4,7kg

Dimensions

Controller: L x H x W = approx. 9cm  x 6cm x 2.7 cm

Rim size: 26, 27.5 or 28 inch depending on selection

Wheel rim max outer dimensions: 26" = 580mm, 27.5" = 596mm, 28" = 630mm

Cable length from Display to Controller: 190 cm

PAS sensor cable length: 95cm 

The required gap between PAS Disc and PAS sensor: approx. 5-7mm

Width of rim at outer edge: 25mm